Skip to content


Peelaway Marine Antifoul Remover - Sample Kit

Original price £15.00 - Original price £15.00
Original price
£15.00 - £15.00
Current price £15.00
SKU PM-2x150

We can deliver this to the following destinations

Ships to UK

Ships to UK

Ships to Ireland

Ships to Ireland

Ships to EU

Ships to Europe

Ships Globally

Ships Worldwide


Peelaway Marine, less time under your boat, more time enjoying it!

Peelaway Marine is specially formulated to effectively remove multiple layers of anti-foul coatings with one application saving time by reducing the need for repeated scraping.

Suitable for most hull types including:

  • GRP
  • Wood
  • Steel
  • Concrete

Sample kit includes:

  • 2 x 150g  Peelaway Marine Antifoul Remover
  • Blanket
  • Spatula

A 4kg kit, a 10kg kit and spare blankets are also available.

Its patented water based poultice system means the product remains active and works without rapidly drying out. The special poultice blanket supplied enables stripped anti-foul paint to be collected easily and so reduces boatyard/dockside contamination risk. 

The light paste consistency and is easy to apply to vertical surfaces and difficult shapes. It can be applied with a brush or trowel and for larger areas an airless sprayer can be used. Always carry out a test patch before general application. 

Use in 3 simple steps:

Step 1 - Test Patch

It is often impossible to know the type and build depth of anti-fouling before coatings are removed. It is essential to apply a test patch to an area typical of the surface to be stripped to ensure the results will be satisfactory. This will also indicate the dwell time required and thickness of paste to be applied.

Step 2 - Application Test Patch

Apply evenly with Airless spray, brush or trowel working into crevices, including on wooden hulls where planks overlap. Ensure raised edges and corners are covered well. Then apply a second coat to the final tested thickness. Finally, lay on the poultice with printing facing outwards, gently rubbing to exclude trapped air bubbles. Work in manageable areas which can be removed within the time scale indicated by the test patch. Peelaway Marine should not be left on longer than 48 hours when used on GRP/Gel coat substrates. 

Step 3 - Removal

Slide scraper into paste and paint, keeping the paint, paste and cover together as much as possible. Take care not to gouge/scratch the gel coat. Steam cleaning or pressure washing may aid removal of residues. Once all the old anti-fouling paint has been removed, any remaining residues of Peelaway Marine must be cleaned/washed away. Allow the cleaned surface to dry thoroughly before re-coating. 

 Also available in the Peelaway Marine Antifoul Remover range:

  • 4kg kit -  4kg of antifoul remover, with blanket and spatula
  • 10kg kit -  10kg of antifoul remover, with blanket and spatula
  • Spare blankets - 10 pack

Peelaway Marine SDS available HERE

Fast Delivery Options & Easy Returns

We can delivery most of our non-hazardous products to most countries. We use trusted delivery partners to make sure your order arrives fast and as we packed it.

See our Delivery and Returns pages for more information.

Rated Excellent on Trustpilot


After receiving their order, customers are invited to leave an independent review.

Customers rate us 4.8/5 on Trustpilot