Valves, Spares & Tools - Inflation & PRV Pressure Release Valves

Leafield Marine A7 & B7 RIB Inflation Valve Service Kit. Available in 1s, 3s and 5s - often if one valve is leaking and needing a service kit, ...

Simple screw-in replacement valve core with spring and diaphragm for repair or service of leaking Zodiac semi-recessed valves. The core can either...

Suitable for use with Halkey Roberts type inflation valves as fitted to Wetline, Walker Bay and many other inflatables, dinghies and RIBs. Fits Br...

Low profile spanner for installing or removing the male/screw-in section of the Leafield Marine A6, C7 or D7 type valve in order to service, clean ...

Complete Leafield Marine C7 inflate/deflate valve. The professionals choice! The C7 valve has become the favourite inflatable boat valve for use i...

Complete Service kit for the Leafield Marine C7 valve. Available in 1s, 3s and 5s - often if one valve is leaking and needing a service kit, the ot...

Leafield Marine A4 Inflation/Deflation Boat Valve plug and deflator Fitted to early Avon, Humber, Dunlop RIBs and inflatable boats. Click here fo...

Orca Hypalon valve doubler Critical item when replacing or repairing RIB inflation/deflation valves For RIBs, dinghies and inflatable boats made f...

To connect in the end of the pump / bellows hose to a Leafield Marine A4, A7, B7, C7, D7 & A8 valves. Push fit into the valve To fit either ½”...

Screw-in valve as fitted to early Plastimo, Quicksilver, Maxxon and Yam. The outside diameter of the screw-in thread is 33mm, overall valve body l...

Zodiac Delrin valve core assembly fitted with 'o' ring seal together with cap and cap lanyard. 23mm diameter across the core thread.  Zodiac part...

Leafield Marine A7 & B7 RIB Inflation Valve Service Kit. Available in 1s, 3s and 5s - often if one valve is leaking and needing a service kit,...

Leafield Marine A4 & A5 Valve Cup Diaphragm For an A4  replacement spring click here Leafield Marine part number: A10042

Replacement diaphragm for the Zodiac Delrin Valve as fitted to Zodiac dinghies and Bombard inflatables Zodiac part number Z2195

Valve key for removing and installing the screw-in male valve body 8 section valves as fitted to Waveline 2009 and 2010+ models & Halkey Robert...

Valve spanner for the Bravo range of Flush fit valves (200, 2001 & 2005), Halkey Roberts valves and Valiant Recessed valve. Required when tigh...

If you are unable to replace or repair your existing RIB, dinghy or inflatable boat inflation valve then this kit provides everything to replace an...

This Bravo inflator hose adaptor for Bravo 2000 flush valves will also fit many other screw cap valves. Female connection to hose is for 16mm and 2...

Low profile spanner for installing or removing the male/screw-in section of the Leafield Marine A6 pressure relief valve or B7 valve in order to se...

Halkey Roberts (new type 690NSBV) Supplied in Grey ** Note: Please check the valve model number located on the top of the outer section of the val...

The Leafield A6 PRV is a well tested low profile pressure relief valve. Increasingly fitted by manufacturers to RIB and inflatable boat tubes, rive...

Critical item when replacing or repairing RIB inflation/deflation valves For RIBs, dinghies and inflatable boats made from PVC Available in a rang...

Leafield Marine A7 Valve Fitted to older Avon, Narwhal, Ribtec RIB inflatable boats and dinghies and many other make of RIBs and dinghies before t...

Service Kit for Alfons Haar SF1 Inflation Valve as fitted to the Atlantic class RNLI RIBs, Sillinger and some other military commercial spec inflat...