Valve Replacement & Service Kits

Complete Service kit for Leafield Marine A7 and B7 RIB and inflatable dinghy inflate deflate valves

Leafield Marine C7 inflate deflate valve. Latest version of the ever reliable A7/B7 Valve, as fitted to many quality RIBs and inflatables including Avon, Ribcraft, Humber, Redbay.

Hypalon Fabric Doubler - Pre-cut for reinforcing and fitting replacement valves. Available in a range of colours and pre-cut to 150mm diameter. Suitable for most screw-in type inflation valves, including Leafield valves (C7, B7, A7), Halkey Roberts etc

Complete Service kit for the Leafield Marine C7 inflatable boat valve

Complete RIB, inflatable boat and dinghy inflation valve replacement kit complete with detailed instructions - For Hypalon fabric Tubes

PVC Fabric Doubler - Pre-cut to 150mm diameter for reinforcing and fitting replacement valves.

Complete Service kit for Leafield Marine A7 and B7 RIB and inflatable dinghy inflate deflate valves

Replacement/spare cap for Leafield A7 Valve (Grey or Black) as fitted to older Avon, Narwhal, Ribtec etc and many other make of RIBs and dinghies before the introduction of the Leafield B7 and then C7 valves

Tough valve key - fits Halkey Roberts inflate/deflate valve, some Seago dinghy's, Waveline 8 section 2009 model valves, and other 8 section screw-in type valves

Leafield Marine A7 Inflate / Deflate Valve - fitted to older Avon, Narwhal, Ribtec RIB inflatable boats and dinghies and many other make of RIBs and dinghies before the introduction of the Leafield B7 and then C7 valves

Complete inflation valve replacement kit, suitable for most RIB, inflatable boats and dinghy inflate/deflate valve replacement. Complete with detailed instructions - For PVC Fabric Tubes

Sealing washer for the Leafield Marine C7 inflate deflate valve

Leafield Marine A7 Valve Cap Seal

Leafield Marine B7 inflate deflate valve as fitted to some Avon RIB's and dinghy's - same internals as the older A7 Valve but with an updated contoured valve cap

Leafield Marine A7 & B7 Valve Sealing Washer

Leafield Marine A6 Pressure Relief Valve (PRV) - low-profile, as used on many RIBs, larger inflatable boats and some SOLAS approved liferafts and some RIBs.

Leafield D7 High Pressure inflate deflate valve - the latest model in the ever reliable Leafield valve range

The HP D7 is the high pressure version (up to 20psi - designed for ) and has the highest flow rate of all of Leafield's inflation valves, reducing deflation time but with Leafield's renowned engineering.

Grey D7VGHC01GH-REV02

Black D7VBHC01BF-REV02/p>

Complete service kit for Leafield Marine D7 standard inflatable boat valve

Leafield Marine A7 Valve Recessed Moulding

Leafield Marine D7 High Pressure service kit