RIBstore

PVC fabric supplied in 1.5 metre width and cut per 25cm length increments - Used for repairs or tube wear patches, easy to cut and apply Easy t...

We have a number of pieces of PVC fabric which is available at a discounted rate. It might be older stock (so likely to be a bit dusty/need a wipe...

PVC D-Ring Diameter of D-Ring 150mm Width inside D-Ring 50mm Fit to PVC tubes using 2-part PVC adhesive Zodiac made are available in black ...

PVC D-Ring Diameter of circular patch 110-130mm Width inside D-Ring 26mm Fit to PVC tubes using 2-part PVC adhesive Zodiac (120mm) are avai...

RIBstore's PVC Inflatable Boat Repair 2-Part Adhesive Glue is supplied with curing agent for permanent repairs to PVC dinghies, RIBs and inflatable...

Large PVC 130mm circular lifeline holder with 15mm hole for lifeline Available in Black or Grey.

Complete replacement PVC Rowlock fitting for the captive pin & screw style oar lock, includes oarlock pad, pin with threaded end, hinge bar and...

Suitable for holding oar/paddle in desired position on your boat PVC patch with strong webbing and Velcro straps. 100mm diameter patch Black p...

PVC fabric for professional repairs to PVC inflatable boats, dinghies and RIBs 12cm diameter circle Ideal for one small repair Use 1-part PVC ...

PVC fabric for professional repairs to PVC inflatable boats, dinghies and RIBs Size 150cm x 15cm Easy to cut using scissors or utility knife U...

PVC fabric for professional repairs to PVC inflatable boats, dinghies and RIBs Size 30cm x 30cm Easy to cut using scissors or utility knife Us...

PVC fabric for professional repairs to PVC inflatable boats, dinghies and RIBs 37cm x 15cm rectangle patch Easy to cut using scissors or utilit...

PVC fabric for professional repairs to PVC inflatable boats, dinghies and RIBs Size 70cm x 15cm Easy to cut using scissors or utility knife Us...

Single part PVC adhesive is for temporary repairs. We strongly recommend using a 2-part PVC adhesive for permanent PVC repairs.  Use MEK solvent...

PVC fabric seam tape for professional repairs to PVC inflatable boats, dinghies and RIBs Size 1.5m x 5cm Easy to cut using scissors or utility ...

Critical item when replacing or repairing RIB inflation/deflation valves For RIBs, dinghies and inflatable boats made from PVC Pre-cut to 150mm...

PVC Wear Patch fabric with a diamond dimpled finish which can stop sliding off wet tubes. Also suitable to cover up fading & UV damaged top ...

PVC Wear Patch fabric with a diamond dimpled finish which can stop sliding off wet tubes. Also suitable to cover up fading & UV damaged top ...

Quick release drop nosed pin for Ceredi Launching Wheels: 100kg 200kg Allows for quick release of leg & wheel Overall length of Pin 61mm ...

Screw-in type Inflation deflation valve as fitted to newer Quicksilver roll-up inflatables and dinghyies Dimensions: Inner Valve (Male): W 68mm ...

Quicksilver non-return transom drain and bung as used on Quicksilver dinghies and some Valiant RIBs 32mm diameter opening and fits a 47mm hole i...

If the name badges on your Avon SIB, Dinghy or RIB tubes are cracked, faded or damaged, then why not replace them? Laser cut from Pennel &...

Replacement non-return diaphragm for the 42mm drain socket, which is part of the Transom Drain Kit.

Rubber bung plug for inflatable boat or dinghy transom drains - 35mm diameter (slightly tapered for secure fit) and 20mm depth Supplied with bla...