Valves, Spares & Tools - Inflation & PRV Pressure Release Valves

Leafield Marine A7 & B7 RIB Inflation Valve Service Kit. Available in 1s, 3s and 5s - often if one valve is leaking and needing a service kit, ...

Low profile spanner for installing or removing the male/screw-in section of the Leafield Marine A6, C7 or D7 type valve in order to service, clean ...

To connect in the end of the pump / bellows hose to a Leafield Marine A4, A5, A7, B7, C7, D7 & A8 valves. Push fit into the valve To fit eithe...

Complete Leafield Marine C7 inflate/deflate valve. The professionals choice! The C7 valve has become the favourite inflatable boat valve for use i...

Complete Service kit for the Leafield Marine C7 valve. Available in 1s, 3s and 5s - often if one valve is leaking and needing a service kit, the ot...

Leafield Marine A4 Inflation/Deflation Boat Valve plug and deflator Fitted to early Avon, Humber, Dunlop RIBs and inflatable boats. Click here fo...

Low profile spanner for installing or removing the male/screw-in section of the Leafield Marine A6 pressure relief valve or B7 valve in order to se...

Leafield Marine A7 & B7 RIB Inflation Valve Service Kit. Available in 1s, 3s and 5s - often if one valve is leaking and needing a service kit,...

The Leafield A6 PRV is a well tested low profile pressure relief valve. Increasingly fitted by manufacturers to RIB and inflatable boat tubes, rive...

Ruggedised Pressure Gauge with adaptor for Leafield Marine A7, B7, C7 & D7 (normal pressure) valves. (For use with the Leafield Marine D7 HIGH ...

Leafield Marine A4 & A5 Valve Cup Diaphragm For an A4  replacement spring click here Leafield Marine part number: A10042

Leafield Marine A7 Valve Fitted to older Avon, Narwhal, Ribtec RIB inflatable boats and dinghies and many other make of RIBs and dinghies before t...

Sealing washer for the Leafield Marine C7 inflate/deflate valve. Fits on the outside of the tube to ensure an airtight seal between the tube and th...

Replacement/spare cap for Leafield Marine A7 Valve as fitted to older Avon, Narwhal, Ribtec etc and many other make of RIBs and dinghies before th...

Leafield Marine B7 Inflate/Deflate Valve - fitted to Avon, Narwhal, Ribtec RIBs, inflatable boats and dinghies plus many other makes before the int...

Leafield Marine C7 & D7 Valve Cap and Strap The rugged cap retaining strap is hidden from view when the cap fitted to prevent it snagging on o...

Leafield Marine A7/B7Valve Cap Seal   Leafield Marine part number: B12000

The new D7 Valve has several benefits over the previous C7 model with improved inflation/deflation speed. It has an enhanced clamping method with a...

Leafield Marine B7 Valve Cap & Strap With concealed strap to avoid catching. Available in black and grey Leafield Marine part number black: B...

Leafield Marine A7 & B7 Valve Sealing Washer   Leafield part number: A11908

Leafield Marine A5 Inflate / Rapid Deflate Valve Very high deflation rate through 35mm diameter orifice Moulded rubber construction avoids damage ...

  Provides an effective secondary seal on the valve. This is a requirement for some life raft approvals. This cap can also be useful in preventing...

Complete service kit for Leafield Marine D7 standard inflatable boat valve Contains: Spring Plunger Diaphragm Cap seal For the D7 high pressure s...

Ruggedised Pressure Gauge with adaptor for Leafield Marine D7 high pressure valve. For use with the Leafield MarineA7, B7, C7 & D7(normal press...

Leafield Marine A4 Inflation deflation valve. As fitted to early Avon and Humber RIBs, dinghies and inflatable boats Instruction sheet here  Leaf...

Leafield Marine A5 Valve Plug Cap

Leafield Marine Inner Diaphragm for A3 Relief Valves, as used on many commercial RIBs, including Avon, Zodiac, and also SOLAS approved liferafts.

Leafield Marine A7 Valve Recessed Moulding Used for heavy-duty applications. For use when the buoyancy tube requires a smooth surface where comp...

Leafield Marine D7 inflate deflate valve - the latest model in the ever reliable Leafield valve range. The D7 has the highest flow rate of all of ...

Complete service kit for the Leafield Marine D7 HIGH PRESSURE inflatable boat valve as used on most quality RIBs and inflatable boats. Kit comprise...

Leafield Marine Spring for A3 Relief Valves. Available in range of blow-off pressures from 1.75psi to 3.25psi

Replacement cup diaphragm for Leafield Marine A8 Inflation / Topping Up Valve Leafield Marine part number: B11214

Leafield Marine A3 Relief Valves. Available in range of blow-off pressures from 1.75psi to 3.25psi Manufactured to order - please allow 14 days.

Very compact size. Rugged construction. Good flow rate due to low opening pressure. Smooth contoured product. Cap acts as a protective cover and s...

For use in environments where contamination is possible e.g. river rafts. Ultrafine mesh prevents contamination without affecting the pressure rel...

B7 Valve Socket Tool